Grady-White Express 360
Price AU $695,000 SOLD
The following has been completed on White Noise since the purchase in August of 2020:
Outside:
o New Ultra Anchor and 50 meters of 8mm short link anchor chain.
o New Lumar windlass gypsy to accommodate 8mm short link chain.
o New foot switches for the anchor windlass.
o New Stainless Steel fender holders (4) on bow rail.
o New dock lines and line keepers.
o New Soft flooring expanded vinyl ester decking installed on all walking surfaces.
o New windscreen washer spray nozzles.
o Replaced 4 skin fittings for seawater intakes for live well, raw water, gen set, and refrigeration/AC.
o Removed and resealed 8 windows across front windscreen.
o New dark blue hull wrap from rub rail to waterline.
o All snap anchors have been replaced and all screws in all exterior trim have been replaced in the cockpit and helm station annually.
o New Precision Carbon Fiber outriggers with new rigging.
o New helm station/Captain's chair pedestal (Grady White original equipment). New folding foot rest installed.
o New handheld shower/spray nozzle in bait station sink in cockpit and transom shower.
o New upholstery in cockpit (bolsters and seats, and all helm station seating.
o New shotgun rigger.
o Annually, full detail including all bright work.
o Annually, full hull and engine leg anti-foul.
Inside main cabin:
o New 32" smart television (12V) with Apple TV
o New Galvanic Isolator.
o New CO detectors (2) in main cabin.
o Converted Galley fridge to operate on 12v.
o New forward berth bolster upholstery.
o New upholstery for settee, bumpers, and new custom fit berth covers for forward and mid cabin berths.
o New tempurpedic mattress toppers made to fit to mid-cabin and forward berth with zip off covers for easy cleaning.
o New forward berth hatch window frames with black-out and fly-screen closures.
o Electrical and lighting:
o Completed generator service, including heat exchanger descaling and fuel filter replacements, serviced annually since.
o New Victron 3 Kw inverter charger installed.
o Four 125-amp hour Lithium-ion batteries (500-amp hours) installed as house batteries.
o New engine-start batteries installed, 75-amp hour versus previous 60-amp hour.
o New 60-amp battery charger installed versus previous 40-amp for quicker battery recovery. New switching panel installed in battery box to enable using AMG or lithium batteries for engine start.
o Two Victron 30-amp and two Victron 18-amp DC-DC chargers installed to maximize use of engine generated power for house battery charging (to limit need for long term generator running. )
o New Victron battery management system.
o Removed redundant electrical equipment and cleaned up wiring in several spots.
o New wiper motors, arms, and blade assemblies (Re-wired electrical cabling for the wiper motors. )
o Serviced motor for bow thruster, new bow thruster battery and battery charger installed. (Bow thruster tunnel flares were moulded and installed with the entire assembly fiberglassed into position.
o 3 new high power underwater lights (white or blue) on stern. Each with an individual circuit breaker to disconnect if needed.
o New down lights in the main cabin and head.
o New 12V blue strip lighting in cockpit under gunwales and in main cabin forward berth courtesy lighting alcove.
o All bilge pumps replaced.
o New live well pump.
o New raw water pump
o New freshwater pump
o New, larger shower sump with external gulper pump
o 3 new down lights for helm station ceiling.
o Installed a new breaker (15 amp) at switch panel for underwater lights.
o Installed blue courtesy light in helm.
o New Shore Power receptacles and (2) new shore power cables
o New Siren Marine 3 alarm and system monitoring with new motion detector, cabin entry sensor, high water sensor, shore power sensor, battery sensor, engine sensor, with GEO-fence capability and GPS location monitoring.
o Segregated the control systems for the refrigerated fish box from the cockpit cooler refrigeration for independent operation.
o New cabin and helm station A/C units.
o Installed separate bilge pump in the centre-bilge to manage rain/wash water.
o Installed new dash panel for helm master.
o 3 new 12V Scirocco fans installed (2 in helm station and 1 in main cabin. )
o AIS system upgraded with new transceiver and aerial.
o 2 New Furuno 16" chart plotters installed and integrated with the Helm Master system.
o New Furuno 3D multi-beam transducer and sounder installed.
o New Furuno closed array Radome.
o New Furuno Sat Compass
o New Cell-Fi Go system for improved cellular coverage offshore.
o New Black Hawk cell booster system with aerial
o Replaced all aerial bases with stainless steel.
o Installed new Scan Strut aerial mast for new radar, Sat Compass, AIS, GPS and Cell-fi Go aerials and anchor light.
o Installed 2nd VHF radio with new aerial. Installed new aerial for existing VHF radio.
o Added a 2nd EPIRB.
o 6 x New JBL speakers installed through main cabin, helm station and cockpit. To accompany the Fusion Bluetooth audio system.
Outboard Power Plant:
o New engines, TWIN Yamaha 350 hp outboards with engine covers. (Engines serviced every 100 hours by Brisbane Yamaha. Installed in October 2020 and currently have 730 hours each.
o New Yamaha Helm Master system. (joystick, autopilot, digital electric steering. )
Spare parts (Included with sale):
o Two new bilge pumps pre-wired and plugged.
o New refrigeration cooling pump, pre-wired. (a separate waterproof safety outlet installed at the pump location to avoid need for electrical work should pump need replaced. Simply mount the new pump, connect the plumbing and plug in.
o New pressure accumulator for freshwater system.